Fiber Patch Cord
-
LC upc to lc upc duplex os2 single mode armored riser OFCR 3.0mm patch cable duplex 3m
LC upc to lc upc duplex os2 single mode armored riser OFCR 3.0mm patch cable duplex 3m
-
SC/UPC12 Fibers Bunch OS2 PVC 0.9mm 1.5m Fiber optic Pigtail
12 fibers optic pigtails are ideal for fusion splicing the required fiber connectivity for structured cabling systems including Data Centers, Broadband CATV, PON (Passive Optical Network), WDM or DWDM multiplexing, FTTH and voice services in ATM and SONET metropolitan and access networks.
The OS2 bend insensitive fiber optic pigtails have less attenuation when bent or twisted compared with traditional fiber optic pigtails and this will make the installation and maintenance more efficient -
3m LC UPC to LC UPC Simplex OS2 Single Mode 7.0mm LSZH FTTA Outdoor Fiber Patch Cable
Specification
- GYFJH Cable
1.1 Structure:
1.2 Application
Mainly used in wireless base station horizontal and vertical cabling
1.3 Features
1, Good mechanical and environmental characteristics;
2, Flame retardant characteristics meet the requirements of relevant standards;
3, The mechanical characteristics of jacket meet the requirements of relevant standards;
4, Soft, flexible, water blocked, UV resistant, easy to lay and splice, and with big capacity data transmission;
5, Meet various requirements of market and clients
1.4 Cable Parameters
Fiber Count Cable Dimensionmm Cable Weightkg/km TensileN CrushN/100mm Min. Bend Radiusmm Range of Temperature Long Term Short Term Long Term Short Term Dynamic Static 2 7.0 42.3 200 400 1100 2200 20D 10D -30-+70 Note: 1. All the values in the table, which are for reference only, are subject to change without notice;2. The cable dimension and weight are subject to the simplex cable of 2.0 outer diameter; 3. D is outer diameter of the round cable;
- one single mode fiber
Item
Unit
Specification
Attenuation
dB/km
1310nm≤0.4
1550nm≤0.3
Dispersion
Ps/nm.km
1285~1330nm≤3.5
1550nm≤18.0
Zero dispersion wavelength
Nm
1300~1324
Zero dispersion slope
Ps/nm.km
≤0.095
Fiber cutoff wavelength
Nm
≤1260
Mode field diameter
Um
9.2±0.5
Mode field concentricity
Um
<=0.8
Cladding diameter
um
125±1.0
Cladding non-circularity
%
≤1.0
Coating/cladding concentricity error
Um
≤12.5
Coating diameter
um
245±10
bending, dependence induced attenuation
1550nm, 1turns,32mm diameter 100rums,60mm diameter
≤0.5 db
Proof test
kpsi
≥100
- Connector Specification
ITEM
PARAMETER
Connector type
DLC/UPC . FC/UPC Insertion Loss
<=0.3db
Return Loss
>=50db
Fiber mode
Single mode 9/125
Operating wavelength
1310nm, 1550nm
Test wavelength
1310nm, 1550nm
Repeatability
<=0.1
Interchangeability
<=0.2dB
Durability
<=0.2dB
Fiber Length
1m, 2m….. any length optional.
Length and tolerance
10cm
Operating Temperature
-40C ~ +85C
Storage Temperature
-40C ~ +85C
-
LC/UPC-LC/UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber patchcord
LC/UPC-LC/UPC Duplex Fiber optic patch cord
Optical Fiber Patch Cord (Jumper) is a length of optical fiber with two ends adding connectors to connect beam path. Pigtail is a length of fiber permanently attached connector only at one end. B&D patch cords assembled with various types of connectors (such as FC, SC, ST, LC, MU, MTRJ, etc.) There are three kinds of polished fiber end-face: PC, UPC and APC. we employ advanced technique and equipment to manufacture so as to ensure the high quality of mass production.
-
2.0mm SX MM Fiber Optic Patch cord
FIBER OPTIC PATCH CORD-MM(OM2, OM3, OM4)
A patch cord is a fiber optic cable used to attach one device to another for signal routing. Normally, there are 4 types connector: FC/SC/LC/ST.. 2types ferrule: PC, UPC.
FC stands for Fixed Connection. It is fixed by way of threaded barrel housing. FC connectors are generally constructed with a metal housing and are nickel-plated.
-
3.0mm G652D Fiber Optic Patch cord
A patch cord is a fiber optic cable used to attach one device to another for signal routing. Normally, there are 4 types connector: FC/SC/LC/ST.. 3types ferrule: PC, UPC, APC…
FC stands for Fixed Connection. It is fixed by way of threaded barrel housing. FC connectors are generally constructed with a metal housing and are nickel-plated.
-
FTTA jumper-PDLC-DLC Fiber Outdoor Patch cord
Good mechanical and environmental characteristics;
Flame retardant characteristics meet the requirements of relevant standards;
The mechanical characteristics of jacket meet the requirements of relevant standards;
Soft, flexible, water blocked, UV resistant, easy to lay and splice, and with big capacity data transmission;
Meet various requirements of market and clients。
